Latest Updated Juniper JN0-360 Dumps & JN0-360 Study Guide

Important Info: These new valid Juniper JN0-360 exam questions were updated in recent days by Juniper JN0-360,please visit our website : https://www.pass4itsure.com/jn0-360.html to get the full version of new Juniper JN0-360 dumps with free version of new VCE Player, you can pass the exam easily by training it!

JN0-360 dumps

QUESTION 84
Which two statements are true regarding GRE tunnel overhead? (Choose two.)
A. If the host sends a packet larger than the MTU, that packet must be dropped.
B. Packets are not dropped because the router clears the DF bit for GRE traffic by default.
C. Packets larger than the MTU are fragmented or dropped depending on the DF bit setting.
D. You can change the tunnel MTU to avoid packet fragmentation or drops.

Correct Answer: CD QUESTION 85
— Exhibit –[email protected]> show route 0/0 exact detail inet.0: 14 destinations, 14 routes (14 active, 0 holddown, 0 hidden)
0.0.0.0/0 (1 entry, 1 announced)
*Aggregate PreferencE. 130 Next hop typE. Router, Next hop index: Next-hop reference count: 4 Next hop: 172.30.25.1 via ge-0/0/1.100, selected StatE. Local AS: 65400 AgE. 1:03:46 Task: Aggregate Announcement bits (2): 0-KRT 2-OSPF AS path: I Flags: Generate Depth: 0 Active Contributing Routes (1): 10.0.0.0/16 proto BGP
— Exhibit —
Click the Exhibit button.
You are advertising the route in the exhibit to your OSPF neighbors.
What happens if the 10.0.0.0/16 route is unavailable?
A. The default route will remain active and will “blackhole” all traffic from your OSPF peers.
B. The default route will become unavailable and will no longer be advertised to your OSPF peers.
C. The default route will remain active and will continue to be advertised to your OSPF peers.
D. The default route will become unavailable and will continue to be advertised to your OSPF peers.

Correct Answer: B
QUESTION 86
— Exhibit –[edit policy-options]
[email protected]# show
policy-statement load-balance {

from {
route-filter 10.243.0.0/24 exact;
route-filter 10.224.1.0/24 exact;

}
then {
load-balance per-packet;

} } — Exhibit –Click the Exhibit button.
You have been asked to configure per-packet load balancing.
Referring to the exhibit, which configuration correctly applies the load-balancing policy?
A. [edit routing-options] [email protected]# show forwarding-options {
export load-balance;
}

B. [edit routing-options] [email protected]# show static {
export load-balance;
}

C. [edit routing-options]
[email protected]# show
forwarding-table {
export load-balance;
}

D. [edit routing-options] [email protected]# show routing-table {
export load-balance;
}
Correct Answer: C    070-480 exam
QUESTION 87
— Exhibit –[edit]
[email protected]# show routing-options
rib-groups {

test {
import-rib [ walter.inet.0 nancy.inet.0 ];

} } — Exhibit –Click the Exhibit button.
Referring to the exhibit, what is the result of the RIB group configuration?
A. All routes from the walter.inet.0 and the nancy.inet.0 routing tables will be imported into the default master routing instance.
B. Routes from the walter.inet.0 routing table will be imported into the nancy.inet.0 routing table.
C. All routes will be shared between the walter.inet.0 and the nancy.inet.0 routing tables.
D. Routes from the nancy.inet.0 routing table will be imported into the walter.inet.0 routing table.

Correct Answer: B
QUESTION 88
— Exhibit –{master}[edit] [email protected]# run show task replication
Stateful Replication: Enabled
RE modE. Master

Protocol Synchronization Status
OSPF Complete
RIP Complete
BGP Complete
MPLS Complete
LDP Complete

{master}[edit]
[email protected]# run show bgp summary | match 192.168.1.1

192.168.1.1 65056 288 327 0 2 1:05 Establ
{backup}[edit]
[email protected]# run show system switchover
Graceful switchover: On
Configuration databasE. Ready
Kernel databasE. Ready
Peer statE. Steady State

{backup}[edit]
[email protected]# run show bgp summary | find 192.168.1.1

192.168.1.1 65056 592 737 3778 2 1:33 Establ {backup}[edit]
[email protected]# run show bgp replication
Synchronization master: Session statE. Up, SincE. 6d 20:42:51 Flaps: 1, Last flap reason: Commit-sync error Protocol statE. Idle, SincE. 5d 19:41:52 Synchronization statE. Complete Number of peers waitinG. AckWait: 0, SoWait: 0, ScheduleD. 0 rsync walk at: inet.0 – , queued 0 Messages sent: Open 1, Establish 7415, Update 17, Error , Complete 48 Messages receiveD. Open 1, Request 1 wildcard 47 targeted, EstablishAck 2827, CompleteAck 4
— Exhibit —
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
A. An RE switchover is likely to result in BGP disruption, but no dataplane impact will be seen.
B. An RE switchover is likely to result in BGP disruption which will also effect the dataplane.
C. The system is not yet GRES ready, you need to wait for kernel synchronization to complete.
D. The system is NSR ready and a switchover should be hitless to the BGP control and data plane.

Correct Answer: D

JN0-360 dumps
QUESTION 89
— Exhibit —
{master}[edit]
[email protected]# run show task replication Stateful Replication: Enabled RE modE. Master
Protocol Synchronization Status
OSPF Complete
RIP Complete
BGP Complete
MPLS Complete
LDP Complete

{master}[edit]
[email protected]# run show bgp summary | find 192.168.1.1

192.168.1.1 65056 0 0 11:14 Establ inet.0: 0/0/0/0 inet.2: 0/0/0/0 bgp.l3vpn.0: 0/0/0/0

{backup}[edit]
[email protected]# run show system switchover
Graceful switchover: On
Configuration databasE. Ready
Kernel databasE. Synchronizing
Peer statE. Steady State

{backup}[edit]
[email protected]# run show bgp summary | find 192.168.1.1

192.168.1.1 65056 306 581 0 7 7 Idle — Exhibit —
Click the Exhibit button.
You have been asked to determine if an NSR switchover will be hitless for a given BGP peer.

Referring to the exhibit, which statement is true?

A. The BGP session is idle on the backup RE indicating that the session will flap at switchover.
B. The task replication process has completed on the master indicating a hitless switchover can be expected.
C. The GRES synchronization process is underway and must complete before the protocol state can be checked.
D. The BGP session is idle on the backup RE which is normal; it toggles to established at mastership change.

Correct Answer: A

Juniper JN0-360 Certification Exam contains a powerful new testing engine that allows you to focus on individual topic areas or take complete, timed exams from Juniper JN0-360 dumps.The assessment engine also tracks your performance and presents feedback on a module-by-module basis, https://www.pass4itsure.com/jn0-360.html.html providing question-by-question Juniper JN0-360 Certification to the text and laying out a complete study plan for review. Juniper JN0-360 Certification also includes a wealth of hands-on practice exercises and a copy of the Juniper JN0-360 Certification network simulation software that allows you to practice your Juniper JN0-360 dumps hands-on skills in a virtual lab environment.The Juniper JN0-360 Certification supporting website keeps you fully informed of any exam changes.

Related More Official Informations: http://www.juniper.net/uk/en/training/certification/resources/jncis-sp/

Demo Product- For More Information – visit link below: http://www.exampass.net/download-latest-cisco-210-260-dumps.html

oracl23