[Update December-25] New Release Cisco 100-105 Dumps ICND1 v3.0 Exam Video Questions And Answers With Accurate Answers

Why should someone do Cisco 100-105 dumps? The Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0) (100-105 ICND1) exam is a 90 Minutes (45-55 questions) assessment in pass4itsure that is associated with the CCENT, CCNA Routing & Switching, CCDA, CCNA Security, CCNA Wireless certification. New release Cisco 100-105 dumps ICND1 v3.0 exam video questions and answers with accurate answers. “Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)” is the exam name of Pass4itsure Cisco 100-105 dumps test which designed to help candidates prepare for and pass the Cisco 100-105 exam.

Interactive practice test operates as a realistic simulation of the real Cisco Certified Network Associative Routing & Switching https://www.pass4itsure.com/100-105.html dumps certification exam. One time purchase you can get the 100-105 practice tests and PDF. Pass4itsure provides a totally secure platform for Cisco 100-105 exam.

[Update December Pass4itsure 100-105 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWeVQ5WUxjZG1Idnc

[Update December Pass4itsure 200-125 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWT2VSaUVoODRKR1k

100-105 dumps

Pass4itsure Latest and Most Accurate Cisco 100-105 Dumps Exam Q&As:

Question No : 5 – (Topic 1)  Refer to the exhibit
100-105 dumps

Host A is sending a packet to Host B for the first time. What destination MAC address will Host A use in the ARP request?
A. 192.168.0.1
B. 172.16.0.50
C. 00-17-94-61-18-b0
D. 00-19-d3-2d-c3-b2
E. ff-ff-ff-ff-ff-ff
F. 255.255.255.255
100-105 exam 
Answer: E
Explanation:
For the initial communication, Host A will send a broadcast ARP (all F’s) to determine the correct address to use to reach the destination. ARP sends an Ethernet frame called an ARP request to every host on the shared link-layer legmen. The Ethernet header includes the source host MAC address and a destination address of all Fs representing a broadcast frame. The ARP request contains the sender’s MAC and IP address and the target (destination) IP address. 
Question No : 6 – (Topic 1)
Refer to the exhibit
100-105 dumps

What kind of cable should be used to make each connection that is identified by the numbers shown?
A.
1 – Ethernet Crossover cable
2 – Ethernet straight-through cable
3 – Fiber Optic cable
4 – Rollover cable
B.
1 – Ethernet straight-through cable
2 – Ethernet straight-through cable
3 – Serial cable
4 – Rollover cable
C.
1 – Ethernet rollover cable
2 – Ethernet crossover cable
3 – Serial cable
4 – Null-modem cable
D.
1 – Ethernet straight-through cable
2 – Ethernet Crossover cable
3 – Serial cable
4 – Rollover cable
E.
1 – Ethernet straight-through cable
2 – Ethernet Crossover cable
3 – Serial cable
4 – Ethernet Straight-through cable
Answer: B
Explanation:
When connecting a PC to a switch, a standard Ethernet straight through cable should be used. This same cable should also be used for switch to router connections. Generally speaking, crossover cables are only needed when connecting two like devices (PC-PC, switch-switch, router-router, etc). Routers connect to frame relay and other WAN networks using serial cables. Rollover cables are special cables used for connecting to the console ports of Cisco devices.
Question No : 7 – (Topic 1)  Refer to the exhibit.
100-105 dumps

SwitchA receives the frame with the addressing shown. According to the command output also shown in the exhibit, how will SwitchA handle this frame?
A. It will drop the frame.
B. It will forward the frame out port Fa0/6 only.
C. It will flood the frame out all ports.
D. It will flood the frame out all ports except Fa0/3.
100-105 dumps 
Answer: B
Explanation:
Switches keep the learned MAC addresses in a table, so that when a frame comes in with a destination MAC address that the switch has already learned, it will forward it to that port only. If a frame comes in with a destination MAC that is not already in the MAC address table, then the frame will be flooded to all ports except for the one that it came in on. In this case, Switch A already knows that 00b0.d0da.cb56 resides on port fa0/6, so it will forward the from out that port.
Question No : 8 – (Topic 1) Which statements accurately describe CDP? (Choose three.)
A. CDP is an IEEE standard protocol.
B. CDP is a Cisco proprietary protocol.
C. CDP is a datalink layer protocol.
D. CDP is a network layer protocol.
E. CDP can discover directly connected neighboring Cisco devices.
F. CDP can discover Cisco devices that are not directly connected.
Answer: B,C,E
Explanation:
CDP (Cisco Discovery Protocol) is a proprietary protocol designed by Cisco to help administrators collect information about both locally attached and remote devices. By using CDP, you can gather hardware and protocol information about neighbor devices containing useful info for troubleshooting and documenting the network.
Question No : 9 – (Topic 1)  Refer to the exhibit.
100-105 dumps
A network device needs to be installed in the place of the icon labeled Network Device to accommodate a leased line attachment to the Internet. Which network device and interface configuration meets the minimum requirements for this installation?
A. a router with two Ethernet interfaces
B. a switch with two Ethernet interfaces
C. a router with one Ethernet and one serial interface
D. a switch with one Ethernet and one serial interface
E. a router with one Ethernet and one modem interface
100-105 pdf 
Answer: C
Explanation:
Only a router can terminate a leased line attachment access circuit, and only a router can connect two different IP networks. Here, we will need a router with two interfaces, one serial connection for the line attachment and one Ethernet interface to connect to the switch on the LAN
Question No : 10 – (Topic 1)  What must occur before a workstation can exchange HTTP packets with a web server?
A. A UDP connection must be established between the workstation and its default gateway.
B. A UDP connection must be established between the workstation and the web server.
C. A TCP connection must be established between the workstation and its default gateway.
D. A TCP connection must be established between the workstation and the web server.
E. An ICMP connection must be established between the workstation and its default gateway.
F. An ICMP connection must be established between the workstation and the web server.
Answer: D
Explanation:
HTTP uses TCP port 80, and a TCP port 80 connection must be established for HTTP communication to occur.
Question No : 11 Make Successfully Resolve to server1.example.com where DNS Server is 192.168.0.254.
Answer: 1. vi /etc/resolv.conf
Question No : 12. Quota is implemented on /data but not working properly. Find out the Problem and implement the quota to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user’s or a group of users’ ability to consume disk space. This prevents a small group of users from monopolizing disk capacity and potentially interfering with other users or the entire system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on corporate file servers to ensure continued availability of their systems. Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem. Once the affected partition is full, other users are effectively denied upload access to the disk. This is also a reason to mount different filesystem directories on different partitions. For example, if you only had partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all of the space in your root directory (/). Without at least a little free space in the root directory (/), your system could become unstable or even crash. You have two ways to set quotas for users. You can limit users by inodes or by kilobytesized disk blocks. Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute space. You can set up different quotas for different filesystems. For example, you can set different quotas for users on the /home and /tmp directories if they are mounted on their own partitions. Limits on disk blocks restrict the amount of disk space available to a user on your system. Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas. As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure quotas on RHEL only through the command line interface.
1. vi /etc/fstab /dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
3. touch /data/aquota.user
4. quotacheck -ufm /data
5. quotaon -u /data

6. edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not: Soft limit specify the limit to generate warnings to users and hard limit can’t cross by the user. Use the quota command or repquota command to monitor the quota information.
Question No : 13 One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB. Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk partitions (or possibly RAID arrays) are set up in a bunch of equalsized chunks known as Physical Extents (PE). As there are several other concepts associated with the LVM system, let’s start with some basic definitions: Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array. Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs. Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE. Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home and /var on an LV. Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the commands that you’ll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. ext2online -d /dev/vg0/lv1 to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
4. Create one partitions having size 100MB and mount it on /data.
100-105 exam Answer and Explanation:

1. Use fdisk /dev/hda To create new partition.
2. Type n For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda? Or mke2fs -j /dev/hda? To create ext3 filesystem.
10. vi /etc/fstab Write: /dev/hda? /data ext3 defaults 1 2
11. Verify by mounting on current Sessions also: mount /dev/hda? /data
Question No : 14. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don’t know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault: When System Successfully boot, it will ask for username and password. But you don’t know the root’s password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.

6. Press ctrl+d
100-105 dumps

With multiple modes of testing and self-assessment devices, our 100-105 dumps practice exam is the best in the industry. “Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)“, also known as 100-105 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. Pass4itsure Cisco 100-105 dumps exam questions answers are updated (332 Q&As) are verified by experts. The associated certifications of 100-105 dumps is CCENT, CCNA Routing & Switching, CCDA, CCNA Security, CCNA Wireless.Pass4itsure offers CCNA Routing & Switch https://www.pass4itsure.com/100-105.html dumps ICND1 practice test and interactive PDF. Interactive practice test that can be downloaded and installed on any Windows Operating System.

Cisco 100-105 Dumps Youtube: https://youtu.be/ROy_RACXzTY

 

 

oracl23